HD Holden

H Series Home

HD Holden Specifications

HD Holden part numbers

10 facts you may not have known

HD Holden common issues

HD Holden paint codes

HD & HR Holden Buyers Guide: What to Look for When Buying

HD Holden Trim Levels

When the Holden HD was released – Australia in 1965

HD Holden vs EH Holden

Australian Holden Part Finder

VS Commodore VS SS

1995–1997 · Sedan
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VS Commodore VS SS Change
Years 1995–1997
Body Sedan
Doors 4
Seats 5

← All categories

Brakes

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Component Position Part Number Brand Specification Quantity Notes Where to Buy
Brake Pads Front DB1085
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS SS    Part: DB1085

Bendix Classic / Bendix General CT / PBR Ventilated front disc rotor, single-piston sliding caliper 4 Independent rear suspension introduced from VN; front brake package uprated over the outgoing VL. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Master Cylinder Front/Rear P10330
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS SS    Part: P10330

Girlock / PBR Tandem (dual-circuit) master cylinder with vacuum booster; ABS introduced as an option across this generation 1 ABS became increasingly common as an option through the VN-VS generation. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Brake Shoes Rear B1385
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS SS    Part: B1385

Bendix Classic / PBR Drum rear brake, leading/trailing shoe, integrated handbrake mechanism 2 Rear drums retained on the live-axle Commodore generation across all engine options. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Brake Pads Rear (disc-equipped Calais/SS/V8 variants) DB1086
Fits 9 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS SS    Part: DB1086

Bendix Classic / PBR Solid rear disc rotor, single-piston sliding caliper 4 Rear disc brakes were fitted to higher-specification variants (e.g. Calais, SS); base Executive/Berlina models typically retained rear drums — confirm the specific trim before ordering. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Browse by make/series

The HD Holden debuted to the Australian buying public in February 1965, to replace the EH Holden.

The HD featured a completely new body, which was wider and longer than the previous model EH and offered significant increases in interior space, and equipment levels.

Right Now on eBay HD Holden
Loading…

The Automatic Transmission also received an upgraded in the HD. The Hydramatic three–speed Automatic Transmission featured in the EH had been dropped from the line up. Taking its place would be to be a Powerglide two– speed automatic transmission.

HD Holden Repair Manual

 It became the first Holden offered with a factory performance engine option, called the “X2”. A noteworthy milestone for Holden indeed. Although no V8 option was available with the HD, this move would be a sign of things to come as for the future direction of Holden and Australian motoring in general.

3 different ‘red engine’ variations were available to buyers:

The 100bhp 149 cu in (2.4 L) six was standard in all models except the Premiers

A 115bhp 179 cubic inch (2.9 L) six was standard on Premiers and optional on all other models. 

A 140bhp “X2” version of the “179” was also available as an option on all models. The “X2” featured twin carburetors, a high-lift camshaft, new inlet and exhaust manifolds and a low-restriction exhaust system.

For transmissions, A three speed manual transmission was standard on all models with a two speed “Powerglide” automatic available as an option for all models

HD production reached 178,927 units. Quite significant considering its relatively short time on the production line.

The HD was a major facelift of EH, it looked very different to the previous model EH but still maintained a very ‘American’ look according to consumers.

Many buyers at the time stated the HD did not handle as well as the EH. It was a bigger, heavier car but didn’t have any more power, with the exception of the ‘X2’ engine. The HD faced heavy criticism by many as being unsafe, mainly due to its lack of safety equipment and inadequate braking power.

H Series Home

HD Holden Specifications

HD Holden part numbers

10 facts you may not have known

HD Holden common issues

HD Holden paint codes

HD & HR Holden Buyers Guide: What to Look for When Buying

HD Holden Trim Levels

When the Holden HD was released – Australia in 1965

HD Holden vs EH Holden