HD Holden Common Issues

H Series Home

HD Holden

HD Holden Repair Manual

The HD Holden shows how quickly the Australian automotive scene was evolving in the mid-1960s.

Released in 1965, it was a noticeable step forward from the EH that came before it. Holden refined the body shape, improved ride comfort, and introduced more modern interior appointments while still keeping the familiar mechanical simplicity that made these cars so popular with everyday Australians.

Today, the HD sits firmly in classic territory. It’s not as commonly seen as later models, and clean examples are becoming increasingly rare. Many have already been restored, modified, or lost to time.

And with good reason — these cars are now pushing 60+ years of age.

At that point, even the toughest engineering starts to show its limits.

Rubber hardens. Steel corrodes. Engines wear. And decades of “good enough” repairs slowly become part of the car’s story.

Here are the most common HD Holden problems owners and buyers should know about.

1. Rust Problems

Rust is the number one issue with HD Holdens today.

These cars were built in an era before modern rustproofing techniques, and many spent decades parked outdoors or working in harsh Australian conditions. Coastal air, dirt roads, farm use and long-term storage have all taken their toll.

By now, rust is almost expected somewhere on most surviving examples.

Common rust areas include:

  • lower doors
  • rear quarter panels
  • floor pans
  • boot floors
  • chassis rails
  • windscreen surrounds
  • sill panels and jacking points

Utes and wagons are often the worst offenders due to workload and exposure.

Common symptoms

  • Bubbling paint along lower panels or wheel arches
  • Soft or weakened floor sections underfoot
  • Water leaks into cabin or boot
  • Rust perforation hidden under carpets or trim
  • Heavy filler disguising previous repairs

A solid HD shell is now extremely valuable because proper rust repairs are time-consuming and can quickly exceed the value of a rough car.

Related guide

2. Holden Six-Cylinder Engine Wear

The HD was powered by Holden’s early inline six engines, including the 149 and 179 variants.

These engines are known for being simple and durable, but after more than half a century, wear is unavoidable.

Common issues include:

  • oil leaks from hardened gaskets and seals
  • worn timing chains
  • carburettor tuning problems
  • overheating under load
  • general loss of compression in tired engines

Many HD engines have also been rebuilt or swapped over the decades, so originality varies widely.

Common symptoms

  • Rough idle or hesitation
  • Hard starting when cold
  • Excessive oil consumption
  • Reduced power and performance
  • Engine noise from internal wear

Despite their age, these engines are still straightforward to repair and remain well supported in the classic Holden world.

Related guide

3. Cooling System Problems

Cooling system issues are one of the most common and preventable problems in HD Holdens.

Radiators clog internally over time, hoses crack and harden, thermostats fail, and water pumps eventually wear out. Once cooling performance drops, overheating becomes a real risk — especially in Australian summer conditions.

Many surviving HDs are still running original or decades-old cooling systems.

Common symptoms

  • Temperature gauge creeping up in traffic
  • Coolant leaks under vehicle
  • Steam from engine bay
  • Sweet smell of coolant
  • Poor heater performance

An overheated Holden engine can quickly turn a small issue into a major mechanical failure.

Related guide

4. Transmission Wear (Manual & Automatic)

The HD Holden was offered with both manual and automatic transmissions depending on specification.

While simple and durable for their time, decades of use and neglect inevitably lead to wear.

Many HD Holdens have lived hard lives:

  • stop-start city driving
  • long highway trips
  • towing small loads
  • and decades without proper servicing

As a result, transmission issues are now very common.

Common symptoms

  • Slipping gears or poor engagement
  • Difficult or notchy manual shifting
  • Harsh or inconsistent gear changes
  • Transmission fluid leaks
  • Shuddering under load

A properly rebuilt transmission can dramatically improve drivability and enjoyment.

Related guide

5. Suspension & Steering Wear

The HD still delivers that classic early Holden driving feel — soft, simple and comfortable — but worn components can make it feel far less stable than intended.

After nearly 60 years, most HDs now suffer from worn:

  • shock absorbers
  • kingpins and steering linkages
  • control arm bushes
  • sway bar components

Cars that spent their lives working or on rough roads are usually in worse condition.

Common symptoms

  • Wandering or vague steering
  • Clunking noises over bumps
  • Uneven tyre wear
  • Excessive body roll
  • Steering vibration at speed

A suspension refresh is one of the most noticeable improvements you can make to safety and drivability.

Related guide

6. Electrical Problems

Electrical systems in early Holdens were extremely basic, but age introduces its own challenges.

In the HD, wiring looms, switches and connectors are now well beyond their intended lifespan. Add decades of repairs and accessories, and electrical gremlins are almost guaranteed.

Common issues include:

  • charging system faults
  • faulty gauges or dash lights
  • intermittent starting issues
  • blown fuses
  • poor earth connections

Common symptoms

  • Flickering lights
  • Flat batteries after sitting
  • Gauges reading incorrectly
  • Random electrical faults
  • Starting inconsistencies

In many cases, restoring earths and cleaning connectors solves more issues than replacing components.

Related guide

7. Oil Leaks

Oil leaks are almost part of the character of early Holden engines at this point.

In the HD, ageing seals and gaskets allow oil to slowly escape from multiple areas over time.

Common leak points include:

  • rocker cover gaskets
  • sump gaskets
  • rear main seals
  • timing cover seals

Common symptoms

  • Oil spots under vehicle
  • Burning oil smell after driving
  • Dirty engine bay and underbody
  • Smoke near exhaust components

Small leaks are common, but larger leaks should always be addressed before they worsen.

Related guide

8. Interior Wear & Ageing Trim

HD interiors were designed for durability, not long-term survival over six decades.

After years of sun exposure and use, most interiors show significant wear unless restored.

Common issues include:

  • cracked dashboards
  • sagging roof lining
  • faded or brittle plastics
  • worn seat upholstery
  • loose interior trim

Utes and wagons tend to be the most heavily worn, while well-kept sedans often survive slightly better.

Common symptoms

  • Sun-cracked dash surfaces
  • Interior rattles and loose panels
  • Sagging headliner
  • Torn or faded seats
  • General cabin ageing

Good original interior components are becoming increasingly rare and valuable.

Related guide

Is the HD Holden Reliable?

For a vehicle built in 1965, the HD Holden is still impressively durable when maintained properly.

Its mechanical simplicity is a major advantage, and most issues are predictable, age-related and well understood within the classic Holden community.

Most HD problems today are:

  • rust-related
  • age-related
  • wear-related
  • maintenance-related

A well-kept example can still serve as a weekend cruiser, collector piece or restoration project.

The HD Holden represents an important step in Holden’s evolution — a bridge between early post-war simplicity and the more refined classics that followed.

Right Now on eBay HD Holden
Loading…

HD Holden Repair Manual