HR Holden

H Series Home

HR Holden specifications

HR Holden part numbers

10 facts you may not have known

HR Holden common issues

HR Holden paint codes

HD & HR Holden Buyers Guide: What to Look for When Buying

HR Holden Trim Levels

When the Holden HR was released

HR Holden vs HD Holden

Australian Holden Part Finder

VT Commodore VT Berlina

1997–2000 · Station Wagon
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VT Commodore VT Berlina Change
Years 1997–2000
Body Station Wagon
Doors 5
Seats 5

← All categories

Oils

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Type Viscosity Capacity Specification Brand Notes Where to Buy
Automatic Transmission Oil
Fits 45 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60-E automatic Castrol Transmax Dexron III / Penrite Dex III Consistent with the 4L60-family automatic carried over from VR/VS.
Automatic Transmission Oil
Fits 59 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60 automatic (V8 Group A used ZF automatic in some variants) Castrol Transmax Dexron III / Penrite Dex III Dexron III is the standard recommendation for GM 4L60-family automatics of this era.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) Capacity is a typical estimate, broadly consistent with VN-VS.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, smaller than the earlier live-axle Salisbury unit open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) As per VN/VP.
Engine Oil (V6: 3.8L Ecotec L36)
Fits 37 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Engine Oil (V6: 3.8L Ecotec L36)

SAE 10W-30 5.3 L 3.8L Ecotec-generation pushrod V6 Castrol GTX 10W-30 / Penrite Everyday 10W-40 5.3L figure sourced from a CarsGuide Q&A on a 1998-era V6 Commodore. Holden\'s factory handbook spec for this era was 10W-30 do not use 20W-50, which is too heavy for this engine\'s oil-pump clearances. VZ also introduced the Alloytec 3.6L V6 late in its run alongside the outgoing Ecotec 3.8L — see VE/VF entry for Alloytec-specific figures if fitted.
Engine Oil (V8: 5.0L 304/308)
Fits 16 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Engine Oil (V8: 5.0L 304/308)

SAE 20W-50 / 15W-40 5.1-5.2 L 5.0L Holden V8 Penrite HPR30 20W-60 Capacity sourced directly from Penrite lube-guide listings (VS Series/Series II 5.0L V8: 5.1 L).
Engine Oil (V8: 5.7L LS1)
Fits 10 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Berlina    Part: Engine Oil (V8: 5.7L LS1)

SAE 10W-30 5.7-6.3 L 5.7L Gen III LS1 V8 Mobil 1 / Penrite HPR Diesel 15 10W-30 or full synthetic 5W-30 Sourced from an HSV VT-II owner\'s handbook (5 L approx incl. filter) and enthusiast forum consensus that later dipsticks (VX onward) require closer to 5.5-6.3 L to reach \'full\'. Confirm against the specific model-year handbook.
Browse by make/series

The HR Holden was first released in April 1966.

Cosmetically, the HR was only a minor facelift of the previous HD model, many people cannot tell the two apart.

Right Now on eBay HR Holden
Loading…

The previous model, HD, had arguably faced more criticism than any previous model. The HR’s main point of emphasis would be to address this.

The main point of emphasis for the HR was safety, which was one of the heaviest criticisms of the HD. Six months after the launch of the HR, all models received a safety upgrade with the addition of front safety belts, windscreen washers, reversing lights, sun visors and a shatterproof interior rearview mirror. It was one of the first cars in the world to offer seatbelts.

The same two engine options (161 cubic inch 2.6L inline 6, 114hp and the 186 cubic inch 3.0L inline 6 126hp) were available. The two previous transmission options (2 speed automatic, 3 speed manual) available with the previous model remained.

An Opel sourced four speed manual transmission was offered from August 1967.

HR Holden Repair Manual

HR Holden production totaled 252 352 in just under two years.

The HR had outsold any Holden model that came before it. Over a quarter of a million sold. The emphasis on safety resonated well with the Australian buying public which can be reflected in the sales.

Even with large sale numbers, big changes were about to come in the future, with the next model, the HK.

H Series Home

HR Holden specifications

HR Holden part numbers

10 facts you may not have known

HR Holden common issues

HR Holden paint codes

HD & HR Holden Buyers Guide: What to Look for When Buying

HR Holden Trim Levels

When the Holden HR was released

HR Holden vs HD Holden