EK Holden

Early Girls

EK Holden specifications

EK Holden part numbers

10 Facts you may not have known

EK Holden common issues

EK Holden paint codes

FB & EK Holden Buyers Guide: What to Look for When Buying

EK Holden Trim Levels

When the EK Holden was released – Australia in 1961

EK Holden vs FB Holden

Australian Holden Part Finder

VS Commodore VS S

1995–1997 · Sedan
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VS Commodore VS S Change
Years 1995–1997
Body Sedan
Doors 4
Seats 5

← All categories

Oils

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Type Viscosity Capacity Specification Brand Notes Where to Buy
Automatic Transmission Oil
Fits 45 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS S    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60-E automatic Castrol Transmax Dexron III / Penrite Dex III Consistent with the 4L60-family automatic carried over from VR/VS.
Automatic Transmission Oil
Fits 59 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS S    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60 automatic (V8 Group A used ZF automatic in some variants) Castrol Transmax Dexron III / Penrite Dex III Dexron III is the standard recommendation for GM 4L60-family automatics of this era.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS S    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) Capacity is a typical estimate, broadly consistent with VN-VS.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS S    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, smaller than the earlier live-axle Salisbury unit open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) As per VN/VP.
Engine Oil (V6: 3.8L Ecotec L36)
Fits 37 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS S    Part: Engine Oil (V6: 3.8L Ecotec L36)

SAE 10W-30 5.3 L 3.8L Ecotec-generation pushrod V6 Castrol GTX 10W-30 / Penrite Everyday 10W-40 5.3L figure sourced from a CarsGuide Q&A on a 1998-era V6 Commodore. Holden\'s factory handbook spec for this era was 10W-30 do not use 20W-50, which is too heavy for this engine\'s oil-pump clearances. VZ also introduced the Alloytec 3.6L V6 late in its run alongside the outgoing Ecotec 3.8L — see VE/VF entry for Alloytec-specific figures if fitted.
Browse by make/series

Introduced on 2 May 1961, the EK series replaced the FB Holden. Visually both cars looked quite similar. Differences were subtle, subtle enough to sell a little over 150 000 models in its 14 months on the production line.

Right Now on eBay EK Holden
Loading…

It would become the second new Holden released in the 1960’s, a decade of great change for Australia and in turn for Holden. The 1960’s would start and end with Australian buyers having very different demands for a family car.

EK Holden Repair Guide

The EK was a minor cosmetic facelift of the previous model. A number of changes took place to improve the car including electric wipers and a new heater . Arguably the most significant change brought about by this model was that it was the first Holden to offer an automatic transmission, a three speed automatic, named the ‘Hydramatic’, imported from the United States. The Hydramatic transmission would soon become very popular amongst buyers. Although a relatively small percentage would sell initially, the automatic transmission would see its popularity increase enormously as time went on. In later Holden models, automatic transmission would be more popular than manual models.

All EK models had a 138 cubic inches (2,260 cc) inline six-cylinder engine. It produced 75 brake horsepower (56 kw). This is the same engine as the FB that came before it.

Although still a respectable engine at the time, competition could be seen on the horizon for Holden. Ford had debuted the Falcon and Chrysler had debuted the Valiant, both bigger cars, with more larger and more powerful engines to boot.

150,214 examples were produced. 36 228 of them featured the all new ‘hydramatic’ automatic transmission.

Early Girls

EK Holden specifications

EK Holden part numbers

10 Facts you may not have known

EK Holden common issues

EK Holden paint codes

FB & EK Holden Buyers Guide: What to Look for When Buying

EK Holden Trim Levels

When the EK Holden was released – Australia in 1961

EK Holden vs FB Holden