Australian Holden Part Finder
- You searched
- spark plug for Holden Belmont HQ
- Part category identified
- Spark plugs → Spark plugs
- Vehicle identified
- HQ Holden Kingswood HQ · Change
We couldn’t find an exact match for spark plug for HQ Holden Kingswood HQ
That doesn’t mean it isn’t available — it isn’t in our catalogue yet. Try one of these:
Not in our catalogue yet? Search for “Holden Belmont HQ Kingswood HQ spark plug” at:
These are retailer searches, not confirmed matches — check the part and your vehicle’s fitment on the retailer’s page before buying.
Tell us what you’re after
We add the parts people ask for. Tell us what you were looking for.
Browse by make/series
Model Name
HD Holden
Previous Model and Next Model
EH, Next model, HR
Dates of Production
Introduced:February 14, 1965
Discontinued: April 1966
The HD Holden was in production for 14 months
Production Figures
178 927
Model Range
Standard Sedan: (HD/215)
Special Sedan: (HD/225)
Standard Wagon: (HD/219)
Special Wagon: (HD/229)
Premier Sedan: (HD/235)
Premier Wagon: (HD239)
Panel Van: (HD/2104)
Utility: (HD/2106)
Prices at Introduction
Standard Sedan: £1 070 ($2 140)
Special Sedan: £1 130 ($2 260)
Standard Wagon: £1 160 ($2 320)
Special Wagon: £1 221 ($2 442)
Premier Sedan: £1 330 ($2 660)
Premier Wagon: £1 420 ($2 840)
Panel Van: £988 ($1 976)
Utility: £977 ($1 954)
Engines
149 LC Low Compression Red 6
Option Number: 528
Engine Prefix: 149E
Capacity: 2450cc 149 cubic inches (2.442 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXUV-2
Bore and Stroke: 3.25 x 3.00 inches (82.5 x 76.2mm)
Power: 95bhp (71kw) at 4400rpm
Torque: 135lb-ft (183Nm) at 2000rpm
Compression Ratio: 7.7:1
149 High Compression Red 6
Option Number: Standard
Engine prefix: 149D
Capacity: 2450cc 149 cubic inches (2.442 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXUV-2
Bore and Stroke: 3.25 x 3.00 inches (82.5 x 76.2mm)
Power: 100bhp (75kw) at 4400rpm
Torque: 145lb-ft (197Nm) at 2000rpm
Compression Ratio: 8.8:1
179 Red 6
Option Number: 529
Engine Prefix: 179F
Capacity: 2950cc 179 cubic inches (2.934 litres)
Type: Conventional, watercooled four stroke, reciprocating piston
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXV-2
Bore and Stroke: 3.563 x 3.00 inches (90.5 x 76.2mm)
Power: 115bhp (86kw) at 4000rpm
Torque: 175lb-ft (237Nm) at 1600rpm
Compression Ratio: 8.8:1
179 X2 Red 6
Option Number: 578
Engine Prefix: 179X
Capacity: 2950cc 179 cubic inches (2.934 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: 2 single barrel Stromberg Carburettors
Bore and Stroke: 3.563 x 3.00 inches (90.5 x 76.2mm)
Power: 140bhp (104kw) at 4600rpm
Torque: 178lb-ft (241Nm) at 2200rpm
Compression Ratio: 8.8:1
Transmission
Manual
3 Speed Manual
Column shift
Synchromesh on 2nd and 3rd
1st: 2.99:1
2nd: 1.59:1
3rd: 1.00:1
Reverse: 2.99:1
Automatic
2 speed Automatic ‘Powerglide’
Column shift
1st: 1.82:1
2nd: 1.1:1
Reverse: 1.82:1
Rear Axle
Name: GM-H Banjo
Option Number: 532A
Ratio:3.55:1
Name: GM-H Banjo
Option Number: 532B
Ratio: 3.36:1
Name: GM-H Banjo
Option Number: 532C
Ratio:3.90:1
Clutch
GMH Belleville diaphragm single dry plate
Body Construction
Monocoque unibody structure
Ignition and Electrical
12 volt 9 plate battery with 44 amp-hour capacity at 20 hour rating of 35 amps
Alternator
Coil and distributor integral centrifrugal and vacuum type advance control
Exhaust
Welded steel tube, unrestricted reverse flow muffler
Suspension
Front: Short and long arm independent type with coil springs. Stabiliser bar. Direct acting tubular telescopic shocks
Rear: Semi-elliptic springs, four leaves on Sedan, five leaves on Station Sedan. Direct acting tubular telescopic shocks
Steering
Recirculating ball type, ratio 16.8:1 with optional Power steering available
Brakes
Front: Hydraulic 9 inch (229mm) drums, Optional disc brakes
Rear: Hydraulic 9 inch (229mm) drums
Wheels
Demountable disc wheels
Tyres
Tubeless 6.40 x 13 four-ply, six-ply optional on Station Sedans and Premier models. Safety rims
Exterior Dimensions (Sedan)
Total Length: 179.6 inches (4569mm)
Total Width: 70 inches (1778mm)
Total Height at kerb weight: 59.1 inches (1501mm)
Wheelbase: 106.0 inches (2692mm)
Front Track: 53.9 inches (1369mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight: 2681lb (1216kg)
Turning Circle: 11.4m
Fuel Tank Capacity: 11.5 gallons (53.3 litres)
Exterior Dimensions (Wagon)
Total Length: 179.8 inches (4567mm)
Total Width: 70 inches (1778mm)
Total Height at kerb weight: 59.3 inches (1506mm)
Wheelbase: 106.0 inches (2692mm)
Front Track: 53.9 inches (1369mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight: 2764lb (1254kg)
Turning Circle: 11.4m
Fuel Tank Capacity: 11.5 gallons (53.3 litres)