FJ Holden Specifications

Early Girls

FJ Holden

FJ Holden Repair Manual

Model Name

FJ Holden

Previous Model and Next Model

48-215(FX), Next model FE Holden

Dates of Production

Introduced:May 1953

Discontinued: July 1956

The FJ Holden was in production for 38 months

Right Now on eBay FJ Holden
Loading…

Production Figures

169 969

Model Range

Standard Sedan (FJ/215)

Business Sedan (FJ/217)

Special Sedan (FJ/225)

Panel Van (December 1953) (FJ/2104)

Utility (FJ/2106)

Australian Holden Part Finder

VT Commodore VT Acclaim

1997–2000 · Station Wagon
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VT Commodore VT Acclaim Change
Years 1997–2000
Body Station Wagon
Doors 5
Seats 5

← All categories

Oils

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Type Viscosity Capacity Specification Brand Notes Where to Buy
Automatic Transmission Oil
Fits 45 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60-E automatic Castrol Transmax Dexron III / Penrite Dex III Consistent with the 4L60-family automatic carried over from VR/VS.
Automatic Transmission Oil
Fits 59 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60 automatic (V8 Group A used ZF automatic in some variants) Castrol Transmax Dexron III / Penrite Dex III Dexron III is the standard recommendation for GM 4L60-family automatics of this era.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) Capacity is a typical estimate, broadly consistent with VN-VS.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, smaller than the earlier live-axle Salisbury unit open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) As per VN/VP.
Engine Oil (V6: 3.8L Ecotec L36)
Fits 37 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Engine Oil (V6: 3.8L Ecotec L36)

SAE 10W-30 5.3 L 3.8L Ecotec-generation pushrod V6 Castrol GTX 10W-30 / Penrite Everyday 10W-40 5.3L figure sourced from a CarsGuide Q&A on a 1998-era V6 Commodore. Holden\'s factory handbook spec for this era was 10W-30 do not use 20W-50, which is too heavy for this engine\'s oil-pump clearances. VZ also introduced the Alloytec 3.6L V6 late in its run alongside the outgoing Ecotec 3.8L — see VE/VF entry for Alloytec-specific figures if fitted.
Browse by make/series

Prices at Introduction

Standard: £1 023 ($2 046)

Business Sedan: £1 052 ($2 104)

Special Sedan: £1 075 ($2 150)

Panel Van: £985 ($1 970)

Utility: £969 ($1 938)

Exterior Dimensions (Sedan)

Wheelbase: 103 inches (2 620mm)

Total Length: 173.3 inches (4401mm)

Width 66.9 inches (1 699mm)

Kerb Weight 2250lb (1012kg)

Turning circle: 11.3m

Fuel Tank Capacity: 9.5 Gallons (43 litres)

Engines

Grey Engine

Engine Prefix: 121794 to 283372

Capacity: 2160 cc 132.5 cubic inches (2.171 litres)

Type: Conventional, watercooled four stroke, reciprocating piston type

Head Design: Pushrod and rocker actuated ohv with two valves per cylinder

Configuration: Front mounted, longitudinal, inline

Number of Cylinders: 6

Firing Order: 1-5-3-6-2-4

Bore and Stroke: 3 x 3.125 Inches (76.2 x 79.4mm)

Compression Ratio: 6.5:1

Power: 45kW (60bhp) @ 3800 RPM

Torque: 135Nm (100lb-ft) @ 2000 RPM

Fuel System: Stromberg BXOV-1 Carburettor

Transmission

3 Speed Manual

Column Shift

Synchromesh on 2nd and 3rd.

1st: 2.985:1

2nd: 1.591:1

3rd: 1.00:1

Reverse: 2.985:1

Rear Axle

GM-H Banjo

Ratio: 3.98:1

Clutch

Single-plate, dry disc, diaphragm type spring driven plate cushioned to hub by four

high rate coil springs

Body Construction

Monocoque unibody structure

Ignition and Electrical

6 volt battery. Coil and generator

Exhaust

Straight through resonance type muffler to a single tail pipe

Suspension

Front: Short and long arm independent type with coil springs

Rear: Hotchkiss Drive with semi-elliptic springs

Steering

Worm and sector type, ratio 14:1

Brakes

Front: Hydraulic 9 inch (229mm) drums

Rear: Hydraulic 9 inch (229mm) drums

Wheels

Demountable disc wheels with drop centre type rim integral with wheel

Tyres

Low pressure balloon 5.50×15 four-ply (Standard), 5.90×15 four-ply (Special)

Early Girls

FJ Holden

FJ Holden Repair Manual