Model Name
FC Holden
Previous Model and Next Model
FE, Next model FB
Dates of Production
Introduced:May 6th 1958
Discontinued: January 1960
The FC Holden was in production for 20 months
Production Figures
191 724
Model Range
Standard Sedan: (FC/215)
Business Sedan: (FC/217)
Special Sedan: (FC/225)
Standard Wagon: (FC/219)
Special Wagon: (FC/229)
Panel Van: (FC/2104)
Utility: (FC/2106)
Australian Holden Part Finder
- You searched
- spark plug for Holden Executive VT Commodore VT S
- Part category identified
- Spark plugs → Spark plugs
- Vehicle identified
- VT Commodore VT Calais · Change
We couldn’t find an exact match for spark plug for VT Commodore VT Calais
That doesn’t mean it isn’t available — it isn’t in our catalogue yet. Try one of these:
Not in our catalogue yet? Search for “Holden Executive VT Commodore VT Calais spark plug” at:
These are retailer searches, not confirmed matches — check the part and your vehicle’s fitment on the retailer’s page before buying.
Tell us what you’re after
We add the parts people ask for. Tell us what you were looking for.
Browse by make/series
Prices at Introduction
Standard Sedan: £1 141 ($2 282)
Business Sedan: £1 173 ($2 346)
Special Sedan: £1 205 ($2 410)
Standard Wagon: £1 249 ($2 498)
Special Wagon: £1 311 ($2 622)
Panel Van: £1 062 ($2 124)
Utility: £1 039 ($2 078)
Engines
Grey Engine
Engine Prefix: L439507 onwards
Capacity: 2160 cc 132.5 cubic inches (2.171 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of cylinders: 6
Firing Order: 1-5-3-6-2-4
Fuel System: Bendix Stromberg BXOV-1 double venturi downdraft type carburettor, AC mechanical fuel pump.
Head Design: Pushrod and rocker actuated ohv with two valves per cylinder
Configuration: Front mounted, longitudinal, inline
Bore and Stroke: 3 x 3.125 Inches (76.2 x 79.4mm)
Compression Ratio: 7:1
Power: 54kW (72bhp) @ 4000 RPM
Torque: 149Nm (110lb-ft) @ 1200 RPM
Transmission
3 Speed Manual
Column Shift
Synchromesh on 2nd and 3rd.
1st: 2.985:1
2nd: 1.591:1
3rd: 1.00:1
Reverse: 2.985:1
Rear Axle
GM-H Banjo
Ratio: 3.89:1
Clutch
Diaphragm type spring, Single-plate, dry disc, Hydraulically controlled
Body Construction
Monocoque unibody structure
Ignition and Electrical
12 volt battery. Coil and generator
Exhaust
Single tail-pipe, oval shaped, full bore, reverse flow type muffler
Suspension
Front: Short and long arm independent type assembled to front end frame as a single unit. GMH-Delco direct acting tubular telescopic shocks
Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or five for the Business Sedan and Station Sedans). Tension shackles with rubber bushing. GMH-Delco direct acting tubular telescopic shocks.
Steering
Recirculating ball type, ratio 14:1
Brakes
Front: Hydraulic 9 inch (229mm) drums
Rear: Hydraulic 9 inch (229mm) drums
Wheels
Demountable disc wheels with drop centre type rim integral with wheel
Tyres
Tubeless low pressure balloon 6.40 x 13 four-ply
Exterior Dimensions (Sedan)
Total Length: 176.7 inches (4488mm)
Total width: 66.9 inches (1699mm)
Height at kerb weight: 61.0 inches (1549mm)
Wheelbase: 105.0 inches (2667mm)
Front Track: 54.5 inches (1384mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight:
Standard Sedan: 2389lb (1084kg)
Special Sedan: 2412lb (1094kg)
Standard Station Wagon: 2517lb (1142kg)
Special Station Wagon: 2533lb (1149kg)
Panel Van: 2415lb (1095kg)
Utility: 2393lb (1085kg)
Turning circle 11.1m
Fuel Tank Capacity:9.5 Gallons (43 litres)