FC Holden Specifications

Early Girls

FC Holden

FC Holden Repair Manual

Model Name

FC Holden

Previous Model and Next Model

FE, Next model FB

Dates of Production

Introduced:May 6th 1958

Discontinued: January 1960

The FC Holden was in production for 20 months

Right Now on eBay FC Holden
Loading…

Production Figures

191 724

Model Range

Standard Sedan: (FC/215)

Business Sedan: (FC/217)

Special Sedan: (FC/225)

Standard Wagon: (FC/219)

Special Wagon: (FC/229)

Panel Van: (FC/2104)

Utility: (FC/2106)

Australian Holden Part Finder

VT Commodore VT Acclaim

1997–2000 · Station Wagon
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VT Commodore VT Acclaim Change
Years 1997–2000
Body Station Wagon
Doors 5
Seats 5

← All categories

Oils

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Type Viscosity Capacity Specification Brand Notes Where to Buy
Automatic Transmission Oil
Fits 45 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60-E automatic Castrol Transmax Dexron III / Penrite Dex III Consistent with the 4L60-family automatic carried over from VR/VS.
Automatic Transmission Oil
Fits 59 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Automatic Transmission Oil

Dexron III (ATF) ~9.0-9.5 L (dry fill) 4-speed 4L60 automatic (V8 Group A used ZF automatic in some variants) Castrol Transmax Dexron III / Penrite Dex III Dexron III is the standard recommendation for GM 4L60-family automatics of this era.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) Capacity is a typical estimate, broadly consistent with VN-VS.
Differential Oil
Fits 67 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Differential Oil

SAE 80W-90 GL-5 ~1.2-1.4 L Independent rear suspension (IRS) diff, smaller than the earlier live-axle Salisbury unit open or optional limited-slip. Penrite Pro Gear 85W-90 GL-5 (+ LSD friction modifier if fitted) As per VN/VP.
Engine Oil (V6: 3.8L Ecotec L36)
Fits 37 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VT Commodore VT Acclaim    Part: Engine Oil (V6: 3.8L Ecotec L36)

SAE 10W-30 5.3 L 3.8L Ecotec-generation pushrod V6 Castrol GTX 10W-30 / Penrite Everyday 10W-40 5.3L figure sourced from a CarsGuide Q&A on a 1998-era V6 Commodore. Holden\'s factory handbook spec for this era was 10W-30 do not use 20W-50, which is too heavy for this engine\'s oil-pump clearances. VZ also introduced the Alloytec 3.6L V6 late in its run alongside the outgoing Ecotec 3.8L — see VE/VF entry for Alloytec-specific figures if fitted.
Browse by make/series

Prices at Introduction

Standard Sedan: £1 141 ($2 282)

Business Sedan: £1 173 ($2 346)

Special Sedan: £1 205 ($2 410)

Standard Wagon: £1 249 ($2 498)

Special Wagon: £1 311 ($2 622)

Panel Van: £1 062 ($2 124)

Utility: £1 039 ($2 078)

Engines

Grey Engine

Engine Prefix: L439507 onwards

Capacity: 2160 cc 132.5 cubic inches (2.171 litres)

Type: Conventional, watercooled four stroke, reciprocating piston type

Number of cylinders: 6

Firing Order: 1-5-3-6-2-4

Fuel System: Bendix Stromberg BXOV-1 double venturi downdraft type carburettor, AC mechanical fuel pump.

Head Design: Pushrod and rocker actuated ohv with two valves per cylinder

Configuration: Front mounted, longitudinal, inline

Bore and Stroke: 3 x 3.125 Inches (76.2 x 79.4mm)

Compression Ratio: 7:1

Power: 54kW (72bhp) @ 4000 RPM

Torque: 149Nm (110lb-ft) @ 1200 RPM

Transmission

3 Speed Manual

Column Shift

Synchromesh on 2nd and 3rd.

1st: 2.985:1

2nd: 1.591:1

3rd: 1.00:1

Reverse: 2.985:1

Rear Axle

GM-H Banjo

Ratio: 3.89:1

Clutch

Diaphragm type spring, Single-plate, dry disc, Hydraulically controlled

Body Construction

Monocoque unibody structure

Ignition and Electrical

12 volt battery. Coil and generator

Exhaust

Single tail-pipe, oval shaped, full bore, reverse flow type muffler

Suspension

Front: Short and long arm independent type assembled to front end frame as a single unit. GMH-Delco direct acting tubular telescopic shocks

Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or five for the Business Sedan and Station Sedans). Tension shackles with rubber bushing. GMH-Delco direct acting tubular telescopic shocks.

Steering

Recirculating ball type, ratio 14:1

Brakes

Front: Hydraulic 9 inch (229mm) drums

Rear: Hydraulic 9 inch (229mm) drums

Wheels

Demountable disc wheels with drop centre type rim integral with wheel

Tyres

Tubeless low pressure balloon 6.40 x 13 four-ply

Exterior Dimensions (Sedan)

Total Length: 176.7 inches (4488mm)

Total width: 66.9 inches (1699mm)

Height at kerb weight: 61.0 inches (1549mm)

Wheelbase: 105.0 inches (2667mm)

Front Track: 54.5 inches (1384mm)

Rear Track: 54.5 inches (1384mm)

Kerb Weight:

Standard Sedan: 2389lb (1084kg)

Special Sedan: 2412lb (1094kg)

Standard Station Wagon: 2517lb (1142kg)

Special Station Wagon: 2533lb (1149kg)

Panel Van: 2415lb (1095kg)

Utility: 2393lb (1085kg)

Turning circle 11.1m

Fuel Tank Capacity:9.5 Gallons (43 litres)

Early Girls

FC Holden

FC Holden Repair Manual