FC Holden Specifications

Early Girls

FC Holden

FC Holden Repair Manual

Model Name

FC Holden

Previous Model and Next Model

FE, Next model FB

Dates of Production

Introduced:May 6th 1958

Discontinued: January 1960

The FC Holden was in production for 20 months

Right Now on eBay FC Holden
Loading…

Production Figures

191 724

Model Range

Standard Sedan: (FC/215)

Business Sedan: (FC/217)

Special Sedan: (FC/225)

Standard Wagon: (FC/219)

Special Wagon: (FC/229)

Panel Van: (FC/2104)

Utility: (FC/2106)

Australian Holden Part Finder

VS Commodore VS Calais

1995–1997 · Sedan
These are the parts we have for this exact vehicle. Not your vehicle? Change it

Some links below are affiliate links. If you buy through them we may earn a commission at no extra cost to you.

Your vehicle: VS Commodore VS Calais Change
Years 1995–1997
Body Sedan
Doors 4
Seats 5

← All categories

Brakes

Affiliate link: if you buy through it we may earn a commission, at no extra cost to you.

Component Position Part Number Brand Specification Quantity Notes Where to Buy
Brake Pads Front DB1085
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS Calais    Part: DB1085

Bendix Classic / Bendix General CT / PBR Ventilated front disc rotor, single-piston sliding caliper 4 Independent rear suspension introduced from VN; front brake package uprated over the outgoing VL. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Master Cylinder Front/Rear P10330
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS Calais    Part: P10330

Girlock / PBR Tandem (dual-circuit) master cylinder with vacuum booster; ABS introduced as an option across this generation 1 ABS became increasingly common as an option through the VN-VS generation. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Brake Shoes Rear B1385
Fits 32 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS Calais    Part: B1385

Bendix Classic / PBR Drum rear brake, leading/trailing shoe, integrated handbrake mechanism 2 Rear drums retained on the live-axle Commodore generation across all engine options. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Brake Pads Rear (disc-equipped Calais/SS/V8 variants) DB1086
Fits 9 vehicles
View all compatible vehicles
Think this fitment is incorrect? Report it

Vehicle: VS Commodore VS Calais    Part: DB1086

Bendix Classic / PBR Solid rear disc rotor, single-piston sliding caliper 4 Rear disc brakes were fitted to higher-specification variants (e.g. Calais, SS); base Executive/Berlina models typically retained rear drums — confirm the specific trim before ordering. Cross-reference via Bendix/DBA/PBR/Brembo catalogue using rego or VIN — exact part number was not independently verified for this specific engine/trim combination.
Browse by make/series

Prices at Introduction

Standard Sedan: £1 141 ($2 282)

Business Sedan: £1 173 ($2 346)

Special Sedan: £1 205 ($2 410)

Standard Wagon: £1 249 ($2 498)

Special Wagon: £1 311 ($2 622)

Panel Van: £1 062 ($2 124)

Utility: £1 039 ($2 078)

Engines

Grey Engine

Engine Prefix: L439507 onwards

Capacity: 2160 cc 132.5 cubic inches (2.171 litres)

Type: Conventional, watercooled four stroke, reciprocating piston type

Number of cylinders: 6

Firing Order: 1-5-3-6-2-4

Fuel System: Bendix Stromberg BXOV-1 double venturi downdraft type carburettor, AC mechanical fuel pump.

Head Design: Pushrod and rocker actuated ohv with two valves per cylinder

Configuration: Front mounted, longitudinal, inline

Bore and Stroke: 3 x 3.125 Inches (76.2 x 79.4mm)

Compression Ratio: 7:1

Power: 54kW (72bhp) @ 4000 RPM

Torque: 149Nm (110lb-ft) @ 1200 RPM

Transmission

3 Speed Manual

Column Shift

Synchromesh on 2nd and 3rd.

1st: 2.985:1

2nd: 1.591:1

3rd: 1.00:1

Reverse: 2.985:1

Rear Axle

GM-H Banjo

Ratio: 3.89:1

Clutch

Diaphragm type spring, Single-plate, dry disc, Hydraulically controlled

Body Construction

Monocoque unibody structure

Ignition and Electrical

12 volt battery. Coil and generator

Exhaust

Single tail-pipe, oval shaped, full bore, reverse flow type muffler

Suspension

Front: Short and long arm independent type assembled to front end frame as a single unit. GMH-Delco direct acting tubular telescopic shocks

Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or five for the Business Sedan and Station Sedans). Tension shackles with rubber bushing. GMH-Delco direct acting tubular telescopic shocks.

Steering

Recirculating ball type, ratio 14:1

Brakes

Front: Hydraulic 9 inch (229mm) drums

Rear: Hydraulic 9 inch (229mm) drums

Wheels

Demountable disc wheels with drop centre type rim integral with wheel

Tyres

Tubeless low pressure balloon 6.40 x 13 four-ply

Exterior Dimensions (Sedan)

Total Length: 176.7 inches (4488mm)

Total width: 66.9 inches (1699mm)

Height at kerb weight: 61.0 inches (1549mm)

Wheelbase: 105.0 inches (2667mm)

Front Track: 54.5 inches (1384mm)

Rear Track: 54.5 inches (1384mm)

Kerb Weight:

Standard Sedan: 2389lb (1084kg)

Special Sedan: 2412lb (1094kg)

Standard Station Wagon: 2517lb (1142kg)

Special Station Wagon: 2533lb (1149kg)

Panel Van: 2415lb (1095kg)

Utility: 2393lb (1085kg)

Turning circle 11.1m

Fuel Tank Capacity:9.5 Gallons (43 litres)

Early Girls

FC Holden

FC Holden Repair Manual