Australian Holden Part Finder
- You searched
- spark plug for Holden Executive VT Commodore VT S
- Part category identified
- Spark plugs → Spark plugs
- Vehicle identified
- VT Commodore VT S · Change
We couldn’t find an exact match for spark plug for VT Commodore VT S
That doesn’t mean it isn’t available — it isn’t in our catalogue yet. Try one of these:
Not in our catalogue yet? Search for “Holden Executive VT Commodore VT S spark plug” at:
These are retailer searches, not confirmed matches — check the part and your vehicle’s fitment on the retailer’s page before buying.
Tell us what you’re after
We add the parts people ask for. Tell us what you were looking for.
Browse by make/series
Model Name
EJ Holden
Previous Model and Next Model
EK, Next model, EH
Dates of Production
Introduced:July 30, 1962
Discontinued: August 1963
The EJ Holden was in production for 13 months
Production Figures
154 811
Model Range
Standard Sedan: (EJ/215)
Special Sedan: (EJ/225)
Standard Wagon: (EJ/219)
Special Wagon: (EJ/229)
Premier Sedan: (EJ/235)
Panel Van: (EJ/2104)
Utility: (EJ/2106)
Prices at Introduction
Standard Sedan: £1 051 ($2 102)
Special Sedan: £1 111 ($2 222)
Standard Wagon: £1 140 ($2 280)
Special Wagon: £1 200 ($2 400)
Premier Sedan: £1 420 ($2 840)
Panel Van: £988 ($1 976)
Utility: £977 ($1 954)
Exterior Dimensions
Total Length: 176.9 inches (4493mm)
Total width: 68.0 inches (1727mm)
Height at kerb weight: 58.0 inches (1473mm)
Wheelbase: 105.0 inches (2667mm)
Front Track: 54.5 inches (1384mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight:
Standard Sedan: 2492lb (1130kg)
Special Sedan: 2496lb (1132kg)
Premier Sedan: 2639lb (1197kg)
Standard Station Sedan: 2617lb (1187kg)
Special Station Sedan: 2617lb (1187kg)
Turning circle 11.1m
Fuel Tank Capacity: 9.5 Gallons (43 litres)
Body Construction
Monocoque unibody structure
Engines
Grey Engine
Engine Prefix: J1001 onwards
Capacity: 2260cc 138 cubic inches (2.262 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of cylinders: 6
Firing Order: 1-5-3-6-2-4
Fuel System: Bendix-Stromberg BXOV-1, One downdraft Bendix Stromberg carburettor
Head Design: Pushrod and rocker actuated ohv with two valves per cylinder
Configuration: Front mounted, longitudinal, inline
Bore and Stroke: 3.063 x 3.125 inches (77.8 x 79.4mm)
Compression Ratio: 7.25:1
Power: 56kW (75bhp) @ 4200 RPM
Torque: 163Nm (120lb-ft) @ 1400 RPM
Transmission
3 Speed Manual
Column Shift
Synchromesh on 2nd and 3rd
1st: 2.99:1
2nd: 1.59:1
3rd: 1.00:1
Reverse: 2.99:1
3 Speed Automatic Hydramatic
4 stage column shift (Type H562)
1st: 3.639:1
2nd: 1.5775:1
3rd: 1.00:1
Reverse: 3.57
Rear Axle
GM-H Banjo
3.89:1
Clutch
Diaphragm type spring, Single-plate, dry disc, Hydraulically controlled
Ignition and Electrical
12 volt battery. Coil and generator. Distributor automatic centrifugal and vacuum-type advance control
Exhaust
Single pipe, Welded steel tube with full bore, reverse flow type muffler
Suspension
Front: Short and long arm independent type assembled to front end frame as a single unit. GMH-Delco direct acting tubular telescopic shocks
Rear: Hotchkiss Drive with semi-elliptic springs, four leaves (or five for the Business Sedan and Station Sedans). Tension shackles with rubber bushings. GMH-Delco direct acting tubular telescopic shocks.
Steering
Recirculating ball type, ratio 16.3:1
Brakes
Front: Hydraulic, duo serve type
Rear: Hydraulic, duo serve type
Wheels
Demountable disc wheels
Tyres
Tubeless low pressure balloon 6.40 x 13 four-ply, 6.40×13 six-ply optional on Station Sedans