Australian Holden Part Finder
- You searched
- plug for Holden Executive VS Commodore VS Acclaim
- Part category identified
- Spark plugs → Spark plugs
- Vehicle identified
- VS Commodore VS Acclaim
We couldn’t find an exact match for plug for VS Commodore VS Acclaim
That doesn’t mean it isn’t available — it isn’t in our catalogue yet. Try one of these:
Not in our catalogue yet? Search for “Holden Executive VS Commodore VS Acclaim plug” at:
These are retailer searches, not confirmed matches — check the part and your vehicle’s fitment on the retailer’s page before buying.
Tell us what you’re after
We add the parts people ask for. Tell us what you were looking for.
Browse by make/series
Model Name
EH
Previous Model and Next Model
EJ, Next model, HD
Dates of Production
Introduced:August 26, 1963
Discontinued: February 1965
In production for 18 months
Production Figures
256 959
Model Range
Standard Sedan: (EH/215)
Special Sedan: (EH/225)
Standard Wagon: (EH/219)
Special Wagon: (EH/229)
Premier Sedan: (EH/235)
Premier Wagon: (EH239)
Panel Van: (EH/2104)
Utility: (EH/2106)
Option packages:
Holden 179M-S4 Special Sedan: (S4)
Prices at Introduction
Standard Sedan: £1 051 ($2 102)
Special Sedan: £1 111 ($2 222)
Standard Wagon: £1 140 ($2 280)
Special Wagon: £1 200 ($2 400)
Premier Sedan: £1 420 ($2 840)
Premier Wagon: £1 509 ($3 018)
Panel Van: £ 988 ($1 976)
Utility: £977 ($1 954)
S4: £1 160 ($2 320) Only 126 made
Engines
149 Low Compression Red 6
Option Number: 528
Engine Prefix: Y
Capacity: 2450cc 149 cubic inches (2.442 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXUV-2
Bore and Stroke: 3.25 x 3.00 inches (82.5 x 76.2mm)
Power: 95bhp (71kw) at 4400rpm
Torque: 135lb-ft (183Nm) at 2000rpm
Compression Ratio: 7.7:1
149 High Compression Red 6
Option Number: Standard
Engine prefix: H
Capacity: 2450cc 149 cubic inches (2.442 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXUV-2
Bore and Stroke: 3.25 x 3.00 inches (82.5 x 76.2mm)
Power: 100bhp (75kw) at 4400rpm
Torque: 145lb-ft (197Nm) at 2000rpm
Compression Ratio: 8.8:1
179 Red 6
Option Number: 529
Engine Prefix: M
Capacity: 2950cc 179 cubic inches (2.934 litres)
Type: Conventional, watercooled four stroke, reciprocating piston type
Number of Cylinders: 6
Configuration: Front mounted, longitudinal, inline
Head: Pushrod and rocker actuated ohv with two valves per cylinder
Fuel System: Bendix-Stromberg single barrel downdraft type carburettor Bendix Stromberg BXV-2
Bore and Stroke: 3.563 x 3.00 inches (90.5 x 76.2mm)
Power: 115bhp (86kw) at 4000rpm
Torque: 175lb-ft (237Nm) at 1600rpm
Compression Ratio: 8.8:1
Transmission
Manual
3 speed Manual
Column shift
Synchromesh on 2nd and 3rd
1st: 2.99:1
2nd: 1.59:1
3rd: 1.00:1
Reverse: 2.99:1
Automatic
Hydramatic Automatic Transmission (3 speed): Column shift Type H563
1st: 3.513 to 2.933:1
2nd: 1.576:1
3rd: 1.00:1
Reverse: 3.364 to 2.358:1
Rear Axle
Name: GM-H Banjo
Option Number: 532A
Ratio: 3.55:1
Standard application: Commercial manual and all automatic models and S4 models
Name: GM-H Banjo
Option Number: 532B
Ratio: 3.36:1
Standard application: Standard and Special manual models (except commercials):
Name: GM-H Banjo
Option Number: 532C
Ratio: 3.90:1
*Optional for all models
Clutch
GMH Belleville diaphragm, single dry plate
Body Construction
Monocoque unibody structure
Ignition and Electrical
12 volt battery, Coil and generator. Distributor automatic centrifugal and vacuum-type advance control
Exhaust
Single pipe, Welded steel tube with full bore, reverse flow type muffler
Suspension
Front: Short and long arm independent type with coil springs. Stabiliser bar. Direct acting tubular telescopic shocks
Rear: Semi-elliptic springs, four leaves on Sedan, five leaves on Station Sedan. Direct acting tubular telescopic shocks
Steering
Recirculating ball type, ratio 16.3:1
Brakes
Front: Hydraulic 9 inch (229mm) drums
Rear: Hydraulic 9 inch (229mm) drums
Wheels
Demountable disc wheels
Tyres
Tubeless low pressure balloon 6.40 x 13 four-ply, 6.40×13 six-ply optional on Station Sedans
Exterior Dimensions (Sedan)
Total Length: 177.6 inches (4511mm)
Premier Sedan: 179.1 inches (4549mm)
Total Width: 68 inches (1727mm)
Total Height at kerb weight: 58.2 inches (1478mm)
Wheelbase: 105.0 inches (2667mm)
Front Track: 54.5 inches (1384mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight: Automatic: 2612lb (1185kg)
Turning circle 11.1m
Fuel Tank Capacity: 9.5 Gallons (43 litres)
Exterior Dimensions (Wagon)
Total Length: 177.6 inches (4511mm)
Total Width: 68 inches (1727mm)
Total Height at kerb weight: 58.5 inches (1486mm)
Wheelbase: 105.0 inches (2667mm)
Front Track: 54.5 inches (1384mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight: Manual: 2598lb (1178kg)
Turning circle 11.1m
Fuel Tank Capacity: 9.5 Gallons (43 litres)
Exterior Dimensions (Utility/ Panel Van)
Total Length: 176.6 inches (4486mm)
Total Width: 67.9 inches (1725mm)
Total Height at kerb weight: 58.2 inches (1478mm)
Panel Van: 65.9 inches (1674mm)
Wheelbase: 105.0 inches (2667mm)
Front Track: 54.5 inches (1384mm)
Rear Track: 54.5 inches (1384mm)
Kerb Weight:
Utility Manual: 2462lb (1117kg)
Panel Van Manual: 2534lb (1149kg)
Turning circle 11.1m
Fuel Tank Capacity: 9.5 Gallons (43 litres)