HSV VE Senator Signature Specifications

HSV VE Senator Signature

VE Commodore

HSV Specifications

Engines

6.0 Litre V8 Engine LS2

Capacity: 5.967 litre

Type: Conventional, watercooled four stroke, reciprocating piston

Number of Cylinders: 8

Configuration: Front mounted, longitudinal, Vee configuration

Head: Pushrod and rocker actuated overhead valves with two valves per cylinder

Fuel System: OHV, sequential fuel injection

Bore and Stroke: 101.6mm x 92mm

Power: 307kw at 6000rpm

Torque: 550Nm at 4000rpm

Compression Ratio: 10.9:1

Transmissions

Automatic

6 speed GM 6L Series Automatic

Location: Floor

1st: 4.03:1

2nd: 2.36:1

3rd: 1.52:1

4th: 1.15:1

5th: 0.85:1

6th: 0.67:1

Reverse: 3.06:1

Rear Axle Ratios

3.27:1

Chassis

Unitary construction (Monocoque)

Suspension

Front: Independent MacPherson wet strut, linear rate coil springs, wet sleeve shocks, 26mm stabiliser bar.

Sports Suspension (FE2): Firmer spring rate, reduced stabiliser bar diameter, reduced ride height

Rear: Rigid axle, Salisbury type. 5 link location with parallel short upper and long lower trailing arms and a Panhard rod between axle and under body. 16mm decoupled stabiliser bar, 30.2mm diameter dampers

Sports Suspension (FE2): Firmer spring rate, increased stabiliser bar diameter, fuel tank guards

Steering

Power hydraulically assisted Rack and Pinion, variable ratio (17.2:1 on centre to 11.8:1 on lock). Direct linkage (rear to front wheels) from rack to steering arms. Turns lock to lock 2.7

Optional manual rack and pinion, variable ratio (19.7:1 on centre to 23.3:1 on lock. Turns lock to lock 4.5

Brakes

Front: 365mm ventilated disc

Rear: 350mm ventilated disc

Electrical

12 volt negative ground

Battery:

V8 80 min/400 amp eleven plate

Breakerless high energy electronic ignition system.

Exhaust

V8: Cast iron dual exhaust manifolds with single crossover pipe. Single seam welded steel exhaust and tail pipe with two reverse flow mufflers

Wheels

19 inch Alloy

Tyres

Front: 245/40 R19

Rear: 275/35 R19

Exterior Dimensions

VE Senator Signature Sedan:

Total Length: 4947mm

Total Width: 1899mm

Total Height at kerb weight: 1467mm

Wheelbase: 2915mm

Front Track: 1616mm

Rear Track: 1590mm

Kerb Weight:

1430kg

Turning Circle:

10.4 metres

Fuel Tank Capacity:

73 litres

error: Content is protected !!